Viewdata Settings - GE Masoneilan SVI II ESD Installation And Maintenance Manual

Viewing Configuration Data
To view SVI II ESD configuration data:
1. Access VIEW DATA menu from MANUAL menu by pressing the +.
2. Press * to examine configuration. Table 9 lists the menu items.
Configuration
Parameter
Air Action
Air Pressure Units
Language
3. Press + to scroll through and observe the factory configuration.
4. Press + until MANPOS appears and press *. The adjustment screen appears.
5. Stroke the valve open by holding + down. The rate of set point change is slow to begin, but
increases speed while the + is pressed.
6. Stroke the valve to several values.
7. Verify the action is as desired.
© 2016 General Electric Company. All rights reserved.
Table 9 VIEWDATA Settings
Typical Setting
ATO
PSI
ENGLISH
Optional Setting
ATC
BAR KPA
FRENCH, GERMAN, ITALIAN, PORTUGUESE,
SPANISH, JAPANESE (simplified)
Masoneilan SVI II ESD Installation and Maintenance Manual
| 89
=