GE Masoneilan SVI II ESD Installation And Maintenance Manual page 152

Sequence Byte Bit
# #
9 1 AIR_LATCH_
DISABLED
74
9 2 AIR_LATCH_
DELAY
75
152 |
=GE Oil & Gas
Table 12 SVI II ESD Fault Matrix (Continued)
FAULT Name Criticality
of Alarm
3
3
Auto- Can be Non-
mati- cleared/ Mas-
cally Persists kable/
cleared across Annunci-
resets ated
No Yes/No No/Yes
Yes No/Yes No/Yes
TEXT For Probable Cause
DD & English
ValVue
ESD2
English
Air Latch Cannot latch due
HW Mal- to Low Supply
function Pressure due to
one or more of
the position or
pressure sensors
faults.
Airloss Latching
disabled due to
faulty sensor(s)
No Rec. Cannot latch
Delay because Air Latch
Specified Delay was not set
-- would have
never recovered if
latched.
Airloss Latching
delay is not
entered. Cannot
recover.
© 2016 General Electric Company. All rights reserved.
Recommended
Action
If persists contact
GE.
Implemented for
firmware 3.1.6.
If persists contact
GE.
Implemented for
firmware 3.1.6.