Svi Ii Esd Product Safety - GE Masoneilan SVI II ESD Installation And Maintenance Manual

SVI II ESD Product Safety

The SVI II ESD is intended for use with industrial compressed air or sweet natural gas systems
only. Ensure that an adequate pressure relief provision is installed when the application of
system supply pressure may cause peripheral equipment malfunctioning. Installation must be
in accordance with local and national compressed air and instrumentation codes.
General installation, maintenance or replacement
Products must be installed in compliance with all local and national codes and
standards by qualified personnel using safe site work practices. Personal Protective
Equipment (PPE) must be used per safe site work practices.
Ensure proper use of fall protection when working at heights, per safe site work
practices. Use appropriate safety equipment and practices to prevent the dropping of
tools or equipment during installation.
Under normal operation, compressed supply gas is vented from the unit to the
surrounding area, and may require additional precautions or specialized installations.
Explosion/ flame proof installations
Products certified as explosion proof or flame proof equipment or for use in hazardous area
installations MUST BE:
Installed, put into service, used and maintained in compliance with national and local
regulations and in accordance with relevant standards recommendations for
potentially explosive atmospheres.
Used only in situations that comply with the certification conditions shown in this
document and after verification of their compatibility with the zone of intended use
and the permitted maximum ambient temperature
Installed, put into service and maintained by qualified and competent professionals
who have undergone suitable training for instrumentation used in areas with
potentially explosive atmospheres.
© 2016 General Electric Company. All rights reserved.
Before using these products with fluids/compressed gases other
WARNING
than air or for non-industrial applications, consult the factory. This
product is not intended for use in life support systems.
Do not use damaged instruments.
WARNING
Masoneilan SVI II ESD Installation and Maintenance Manual
| 27
=