Checking Actuator, Linkages, Or Rotary Adapter; Valvue Esd For Checking Magnet Position - GE Masoneilan SVI II ESD Installation And Maintenance Manual

ValVue ESD Connected Devices Screen

Checking Actuator, Linkages, or Rotary Adapter

Verify that the mounting has not been damaged in shipment for a pre-mounted SVI II ESD,
physically inspect the actuator, linkage. Record the following information for the configuration
checkout:
Valve Air to Open (ATO) or Air to Close (ATC)
Actuator pressure rating
Actuator bench range
Inherent trim characteristic of the control valve; linear, equal percentage, or other.
Verify Mounting and Linkage Adjustment
Inspect the mounting and make any needed adjustments before running the PST controller
and checking the digital configuration.
70 |
=GE Oil & Gas
Figure 49 ValVue ESD for Checking Magnet Position
For the aforementioned information, refer to the valve data sheet
NOTE
or model number of control valve.
ValVue ESD Check Screen
© 2016 General Electric Company. All rights reserved.