The SVI II ESD LCD pushbutton display enables local operations for calibration and
configuration functions. Remote operations can be performed with ValVue ESD software or
®
any HART
ESD.
The SVI II ESD is supplied with Masoneilan's ValVue ESD software. The user-friendly interface
facilitates the setup and diagnostics of a SIS control valve.
ValVue ESD Software
ValVue ESD software is able to quickly and easily set up the SVI II ESD. In addition you can also
monitor operation and diagnose problems using ValVue ESD's advanced diagnostic
capabilities.
ValVue ESD Trial Version
The SVI II ESD is supplied with ValVue ESD software. For a duration of 60 days after the initial
installation, ValVue ESD provides the capability of configuring, calibrating, diagnosing, device
cloning, trending and much more. After the 60 day trial period ValVue ESD must be registered
in order to keep on using it.
ValVue ESD is a user-friendly, graphical interface that allows an efficient setup of an SVI II ESD
mounted on any control valve assembly. Because of its What-You-See-Is-What-You-Get
(WYSIWYG) software environment, it is a very friendly user-interface.
ValVue ESD functionality includes:
Setup Wizard
Remote display of valve position, actuator pressure(s)
Set point calibration parameters
Set point configuration parameters
Set point status⁄error indicators
Input/Output configuration
Remote calibration of the SVI II ESD
Remote configuration of the SVI II ESD
Remote operation of the SVI II ESD
Remote Partial Stroke Test (PST) configuration
Remote running of Partial Stroke Test
Partial Stroke Test Scheduling
Saving and Viewing Historical data
Backup and restore configuration (clone device)
30 |
=GE Oil & Gas
Registered host interface pre-loaded with the Device Description file (DD) for SVI II
© 2016 General Electric Company. All rights reserved.