Trend setpoint, valve position, actuator pressure
Display comparative test results
Perform diagnostic test procedures
System Requirements
Listed below are the hardware and software requirements for the computer used with ValVue
ESD:
Hardware
Processor
RAM
Disk
Modem
Port
Product
ValVue ESD
PRM Central ValVue ESD
PRM PLUG-IN ValVue ESD
1
Assuming 100 devices, 1 PST/month for 5 years
Software
OS:
Windows XP SP2 Window Server 2003 with Service Pack 1, Window Server 2003 R2,
Windows Server 2008 and Windows 7
PRM:
PRM R3.x
© 2016 General Electric Company. All rights reserved.
PC with minimum 1 GHz Intel Pentium or compatible
Minimum 1 G
Depends on product
®
HART
modem and appropriate cables
Serial or USB
Table 2 ValVue Software Installation Sizes
Application
Component
15M
15M
15M
Table 3 Software Requirements
PRM is NOT required for Standalone installations.
NOTE
Database
Component
1
30M minimum
1
30M minimum
N/A
Masoneilan SVI II ESD Installation and Maintenance Manual
Total Installation Size
45 Meg
45 Meg
15 Meg
| 31
=