Nokia 7210 Configuration Manual page 71

7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
Description This command enables per-screen CLI output, meaning that the output is displayed on a
screen-by-screen basis. The terminal screen length can be modified with the
command.
The following prompt appears at the end of each screen of paginated output:
Press any key to continue (Q to quit)
The no form of the command displays the output all at once. If the output length is longer than
one screen, the entire output will be displayed, which may scroll the screen.
Default more
reduced-prompt
Syntax reduced-prompt [no of nodes in prompt]
no reduced-prompt
Context environment
Platforms Supported on all 7210 SAS platforms as described in this document, including those
operating in access-uplink mode
Description This command configures the maximum number of higher CLI context levels to display in the
CLI prompt for the current CLI session. This command is useful when configuring features
that are several node levels deep, causing the CLI prompt to become too long.
By default, the CLI prompt displays the system name and the complete context in the CLI.
The number of nodes specified indicates the number of higher-level contexts that can be
displayed in the prompt. For example, if reduced-prompt is set to 2, the two highest contexts
from the present working context are displayed by name with the hidden (reduced) contexts
compressed into a ellipsis ("...").
The following is a sample configuration output.
A:ALA-1>environment# reduced-prompt 2
A:ALA-1>vonfig>router# interface to-103
A:ALA-1>...router>if#
The setting is not saved in the configuration. It must be reset for each CLI session or stored
in an exec script file.
The no form of the command reverts to the default.
Default no reduced-prompt
Parameters no of nodes in prompt — Specifies the maximum number of higher-level nodes
3HE 17358 AAAB TQZZA
displayed by name in the prompt, expressed as a decimal integer.
Default 2
Values 0 to 15
Use subject to Terms available at: www.nokia.com
© 2021 Nokia.
CLI Usage
terminal
71