Nokia 7210 Configuration Manual page 544

System Management
The no form of this command specifies that the software does not allocate any resources for
use by filter policies using ipv6 criteria with 64-bit IPv6 addresses. If no resources are
allocated for use, the software fails all attempts to associate a service entity (for example,
SAP and IP interface) with an ingress filter policy using this match criteria.
Parameters num-resources — Specifies the maximum amount of resources for use by this filter
Table 55
mac-match-enable
Syntax mac-match-enable num-resources
no mac-match-enable
544
match criteria.
If the user specifies max, the software allocates one chunk when the first SAP is
associated with an ingress filter policy using this match criteria. It continues to
allocate resources to SAPs associated with an ingress filter policy using this criteria,
as long as the total amount of resources allocated does not exceed the resources
allocated to ingress filter policies (configured with the config system resource-
profile ingress-internal-tcam acl-sap-ingress command) and chunks are
available for use.
Values Table 55
Number of Resources Available for IPv6-64-Only-Match-Enable
Platforms
7210 SAS-M (per node)
7210 SAS-T Access-uplink mode (per node)
7210 SAS-T Network Mode (per node)
7210 SAS-R6 and 7210 SAS-R12 (per IMM)
7210 SAS-R6 and 7210 SAS-R12 IMM-c (per
IMM)
7210 SAS-Mxp (per node)
7210 SAS-Sx 1/10GE (per node)
(standalone)
7210 SAS-Sx 1/10GE (standalone-VC)
7210 SAS-S 1/10GE (per node) (standalone)
7210 SAS-S 1/10GE (standalone-VC)
7210 SAS-Sx 10/100GE (per node)
Use subject to Terms available at: www.nokia.com
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
lists the parameter values.
© 2021 Nokia.
Configuration Guide
Min value Max value
(per node) (per node)
0 5
0 7
0 6
0 5
0 9
0 10
0 6
0 5
0 6
0 5
0 4
3HE 17358 AAAB TQZZA
Default
Values
max
max
max
max
max
max
0
max
0
max
0