Nokia 7210 Configuration Manual page 636

System Management
Table 82
time
Syntax time
Context show>system
Platforms Supported on all 7210 SAS platforms as described in this document, including platforms
configured in the access-uplink operating mode
Description This command displays the system time and zone configuration parameters.
Output The following output is an example of system time information, and
output fields.
Sample Output
A:ALA-1# show system time
636
Output Fields: System Threshold (Continued)
Label
Sample Type
Startup Alarm
Owner
Description
Event Id
Last Sent
Action Type
Owner
Use subject to Terms available at: www.nokia.com
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Description (Continued)
Displays the method of sampling the selected variable and
calculating the value to be compared against the thresholds
Displays the alarm that may be sent when this alarm is first
created
Displays the owner of this alarm
Displays the event cause
Displays the identifier of the threshold event
Displays the date and time the alarm was sent
log — An entry is made in the RMON-MIB log table for each event
occurrence. This does not create a TiMOS logger entry. The
RMON-MIB log table entries can be viewed using the show
system thresholds command.
trap — A TiMOS logger event is generated. The TiMOS logger
utility then distributes the notification of this event to its
configured log destinations which may be CONSOLE, telnet
session, memory log, cflash file, syslog, or SNMP trap
destinations logs.
both — Both a entry in the RMON-MIB logTable and a TiMOS
logger event are generated
none — No action is taken
Displays the owner of the event
© 2021 Nokia.
Configuration Guide
Table 83 describes the
3HE 17358 AAAB TQZZA