Nokia 7210 Configuration Manual page 634

System Management
Table 81
thresholds
Syntax thresholds
Context show>system
Platforms Supported on all 7210 SAS platforms as described in this document, including platforms
configured in the access-uplink operating mode
Description This command display system monitoring thresholds.
Output The following output is an example of system thresholds information, and
the output fields.
Sample Output
A:ALA-48# show system thresholds
================================================================
Threshold Alarms
================================================================
Variable: tmnxCpmFlashUsed.1.11.1
Alarm Id
Rising Event Id
Falling Event Id : 2
Sample Interval
Startup Alarm
Variable: tmnxCpmFlashUsed.1.11.1
Alarm Id
Rising Event Id
Falling Event Id : 4
Sample Interval
Startup Alarm
Variable: sgiMemoryUsed.0
Alarm Id
Rising Event Id
Falling Event Id : 6
Sample Interval
634
Output Fields: System SNTP
Label
SNTP Server
Version
Preference
Interval
: 1
: 1
: 2147483* SampleType : absolute
: either
: 2
: 3
: 2147483* SampleType : absolute
: rising
: 3
: 5
: 2147836
Use subject to Terms available at: www.nokia.com
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Description
The SNTP server address for SNTP unicast client mode
The SNTP version number, expressed as an integer
Normal — Indicates that this server does not have preference
over another
Preferred — Indicates that this server has preference over
another
The frequency, in seconds, that the server is queried
Last Value : 835
Threshold : 5000
Threshold : 2500
Owner : TiMOS CLI
Last Value : 835
Threshold : 10000
Threshold : 5000
Owner : TiMOS CLI
Last Value : 42841056
Threshold : 4000
Threshold : 2000
SampleType : absolute
© 2021 Nokia.
Configuration Guide
Table 82 describes
3HE 17358 AAAB TQZZA