Nokia 7210 Configuration Manual page 237

Service access switch 7210 sas-m, t, r6, r12, mxp, sx, s basic system
Hide thumbs Also See for 7210:
Table of Contents

Advertisement

7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
Step 4. Ensure that the SD card containing the boot loader (boot.tim) and TiMOS
Step 5. On the node that will be the active CPM for the first time boot, log in through
Step 6. Configure BOF parameters as follows:
A:Dut-A# show bof
========================================================================
BOF (Memory)
========================================================================
#eth-mgmt Port Settings:
#System Settings:
=======================================================================
3HE 17358 AAAB TQZZA
(both.tim) software is installed in the SD card slot for each CPM node.
In Release 11.0, the TiMOS image (both.tim) for the CPM-IMM nodes can
be obtained from the local SD card or obtained through the network by
specifying the primary/secondary/tertiary image locations appropriately.
the console port and manually interrupt the boot process.
The boot prompt appears.
- specify standalone-vc for the boot loader parameter chassis-role
- specify a name for the boot loader parameter vc-stack-name
- specify cpm-imm for the boot loader parameter vc-stack-node-type
- specify the slot number and MAC address of each CPM-IMM node in
the bof>vc-stack-node command
- specify the management IP address for the active and standby CPM-
IMM nodes in the bof>eth-mgmt-address command
- configure the TiMOS image location
- configure the configuration file location
See
System Boot Options for 7210 SAS-Mxp, 7210 SAS-S 1/10GE,
7210 SAS-Sx 1/10GE, and 7210 SAS-Sx 10/100GE in Standalone Mode
for information about configuring BOF parameters.
The following output shows an example of a BOF configuration for a CPM-
IMM node.
primary-image
ftp://*:*@135.250.127.36/./images/7xxx-hops/
primary-config
cf1:\default.cfg
no
eth-mgmt-disabled
eth-mgmt-address
10.135.17.166/24 active
eth-mgmt-address
10.135.17.167/24 standby
eth-mgmt-route
10.250.0.0/16 next-hop 10.135.17.1
eth-mgmt-autoneg
eth-mgmt-duplex
full
eth-mgmt-speed
100
wait
3
persist
off
console-speed
115200
no
console-disabled
vc-stack-name
VC-3
vc-stack-node-type cpm-imm
vc-stack-node cpmA slot-num 1 mac-addr d0:99:d5:91:1c:41
vc-stack-node cpmB slot-num 2 mac-addr d0:99:d5:90:1e:41
Use subject to Terms available at: www.nokia.com
© 2021 Nokia.
Virtual Chassis
237

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

7210 sas-mxp7210 r67210 r127210 s7210 sx7210 t

Table of Contents