7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
lifetime
Syntax
lifetime {seconds | forever}
Context
config>system>script-control>script-policy
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms
configured in the access-uplink operating mode
Description
This command is used to configure the maximum length of time that a script may run.
Default
lifetime 3600
Parameters
seconds — Specifies the maximum amount of time that a script may run, in seconds.
forever — Keyword to allow a script to run indefinitely.
max-completed
Syntax
max-completed unsigned
Context
config>system>script-control>script-policy
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms
configured in the access-uplink operating mode
Description
This command enables user to configure the maximum number of scripts to keep the run
history status entries.
Default
max-completed 1
Parameters
unsigned — Specifies the maximum number of script run history status entries to keep.
results
Syntax
results file-url
no results
Context
config>system>script-control>script-policy
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms
configured in the access-uplink operating mode
Description
This command specifies the location where the system writes the output of an event script's
execution.
3HE 17358 AAAB TQZZA
Values
0 to 21474836
Values
1 to 1500
Use subject to Terms available at: www.nokia.com
© 2021 Nokia.
System Management
459