7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
6.11.8 Configuring LLDP
Use the following syntax to configure LLDP.
CLI Syntax:
The following is a sample LLDP port configuration.
*A:7210-SAS>config>port>ethernet>lldp# info
----------------------------------------------
----------------------------------------------
*A:7210-SAS>config>port>ethernet>lldp#
The following is a sample global system LLDP configuration.
A:7210-SAS>config>system>lldp# info
----------------------------------------------
----------------------------------------------
A:7210-SAS>config>system>lldp#
3HE 17358 AAAB TQZZA
config>system>lldp
tx-interval <interval>
tx-hold-multiplier <multiplier>
reinit-delay <time>
notification-interval <time>
tx-credit-max <count>
message-fast-tx <time>
message-fast-init <count>
shutdown
dest-mac nearest-bridge
admin-status tx-rx
tx-tlvs port-desc sys-cap
tx-mgmt-address system
exit
tx-interval 10
tx-hold-multiplier 2
reinit-delay 5
notification-interval 10
© 2021 Nokia.
Use subject to Terms available at: www.nokia.com
System Management
365