Nokia 7210 Configuration Manual page 68

CLI Usage
Platforms Supported on all 7210 SAS platforms as described in this document, including those
operating in access-uplink mode
Description The TCP/IP traceroute utility determines the route to a destination address. Aborting a
traceroute with the Ctrl-c could require issuing a second Ctrl-c before the prompt is returned.
The following is a sample configuration output.
A:ALA-1# traceroute 192.168.xx.xx4
traceroute to 192.168.xx.xx4, 30 hops max, 40 byte packets
1
A:ALA-1#
Parameters ip-address | dns-name — Specifies the remote address to traceroute. The IP address or
ttl ttl — Specifies the maximum Time-To-Live (TTL) value to include in the traceroute
wait milliseconds — Specifies the time in milliseconds to wait for a response to a probe,
no-dns — Keyword to specify not to perform a DNS lookup for the specified host.
source ip-address — Specifies the source IP address to use as the source of the probe
tos type-of-service — Specifies the type-of-service (TOS) bits in the IP header of the
router router-instance — Specifies the router name or service ID.
68
192.168.xx.xx4 0.000 ms
the DNS name (if DNS name resolution is configured) can be specified.
Values ipv4-address a.b.c.d
ipv6-address
request, expressed as a decimal integer.
Values 1 to 255
expressed as a decimal integer.
Default 5000
Values 1 to 60000
Default DNS lookups are performed
packets in dotted decimal notation. If the IP address is not one of the device
interfaces, an error is returned.
probe packets, expressed as a decimal integer.
Values 0 to 255
Values router-name: Base, management
service-id: 1 to 2147483647
Default Base
Use subject to Terms available at: www.nokia.com
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
0.000 ms 0.000 ms
x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x: [0 .. FFFF]H
d: [0 .. 255]D
© 2021 Nokia.
Configuration Guide
3HE 17358 AAAB TQZZA