Nokia 7210 Configuration Manual page 587

7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
Table 68
information
Syntax information
Context show>system
Platforms Supported on all 7210 SAS platforms as described in this document, including platforms
configured in the access-uplink operating mode
Description This command displays general system information including the operating mode, basic
system, SNMP server, last boot and DNS client information.
Output The following outputs are examples of system information, and
fields.
Sample Output
===============================================================================
System Information
===============================================================================
System Name
System Type
System Version
3HE 17358 AAAB TQZZA
Output Fields: Global System Resource Profile
Label
G8032 Fast Flood
Mpls P2MP
Max-ipv6-routes
System-max-ecmp
Max-ip-subnets
port-scheduler-mode
• Sample Output
• Sample Output for 7210 SAS-Sx/S 1/10GE (standalone)
• Sample Output for 7210 SAS-Sx/S 1/10GE (standalone-VC)
Use subject to Terms available at: www.nokia.com
Description
Displays the resources configured for use by G8032 fast-flood
feature
Displays the resources configured for NG-MVPN P2MP LSPs
The amount of L3 forwarding table entries configured for IPv6 /
64-bit address prefix lookups
The maximum number of ECMP paths allowed per IP destination
or LDP FEC
The amount of L3 forwarding entries configured for use by IP
subnets of the directly connected interfaces (both IPv4 and IPv6
interfaces)
The scheduler mode configured for use on egress
It can be either port-based (port-scheduler-mode is enabled) or
SAP-based (port-scheduler-mode is disabled).
: PE4-M2
:
: B-9.0.F-private
© 2021 Nokia.
System Management
Table 69 describes the output
587