Nokia 7210 Configuration Manual page 604

System Management
Table 73
resource-profile
Syntax resource-profile [active | configured]
resource-profile [active | configured] policy-id [detail]
Context show>system
Platforms Supported on all 7210 SAS platforms as described in this document, including platforms
configured in the access-uplink operating mode
Description This command displays the resource-profile protocol configuration and state.
Parameters active | configure — Displays active or configured values.
policy-id — Specifies a resource profile policy. This parameter is only supported on
604
Output Fields: Rollback (Continued)
Label
Last Revert Result
Last Revert Initiated
Time
Last Revert
Completion Time
Delete
Last Rollback Delete
Result
Rollback Files
Idx
Suffix
Comment
Creation Time
Release
User
Active values are those in use by the system currently. Configured values are those
that have been changed by the user and have not taken effect. For the system
resource profile parameters that need a reboot to take effect, the active and
configured values can be different. It typically requires a node reboot or a card reset
for it to take effect.
7210 SAS-R6 and 7210 SAS-R12.
Use subject to Terms available at: www.nokia.com
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Description
The result of the last system rollback reversion
The date and time when the last rollback was initiated
The date and time when the last rollback was completed
The status of the last rollback checkpoint file deletion
The rollback checkpoint file ID
The rollback checkpoint file suffix
User comments about the rollback checkpoint file
The date and time when the file was created
The software load that the checkpoint file was created in
The user who created the file
© 2021 Nokia.
Configuration Guide
3HE 17358 AAAB TQZZA