Nokia 7210 Configuration Manual page 451

7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
end absolute-time — Specifies end parameters for the absolute time-range.
daily
Syntax daily start start-time-of-day end end-time-of-day
no daily start
Context config>system>cron>time-range
Platforms Supported on all 7210 SAS platforms as described in this document, including platforms
configured in the access-uplink operating mode
Description This command configures the start and end of a schedule for every day of the week. To
configure a daily time-range across midnight, use a combination of two entries. An entry that
starts at hour zero will take over from an entry that ends at hour 24.
The no form of this command removes the daily time parameters from the configuration.
Parameters start-time-of-day — Specifies the starting time for the time range.
end-time-of-day — Specifies the ending time for the time range.
weekdays
Syntax weekdays start start-time-of-day end end-time-of-day
no weekdays start
Context config>system>cron>time-range
Platforms Supported on all 7210 SAS platforms as described in this document, including platforms
configured in the access-uplink operating mode
Description This command configures the start and end of a weekday schedule.
The no form of this command removes the weekday parameters from the configuration.
3HE 17358 AAAB TQZZA
Values absolute-time — year/month/day,hh:mm
year — 2005 to 2099
month — 1 to 12
day — 1 to 31
hh — 0 to 23
mm — 0 to 59
Values start-time-of-day — hh:mm
hh — 0 to 23
mm — 0 to 59
Values end-time-of-day — hh:mm
hh — 0 to 23
mm — 0 to 59
Use subject to Terms available at: www.nokia.com
© 2021 Nokia.
System Management
451