Nokia 7210 Configuration Manual page 545

7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
Context configure>system>resource-profile>ingress-internal-tcam>acl-sap-ingress
Platforms Supported on all 7210 SAS platforms as described in this document
Description This command allocates maximum resources for use by ingress filter policies using mac
criteria.
The resources cannot be shared with policies that use either IPv4 or IPv6 match criteria.
Refer the 7210 SAS-M, T, R6, R12, Mxp, Sx, S Router Configuration Guide for more
information about the resource allocation for ingress filter policy and fields available for use
with ingress filter policy.
The no form of this command specifies that the software does not allocate any resources for
use by ingress filter policies using mac criteria. If no resources are allocated for use, the
software fails all attempts to associate a service entity (for example, SAP and IP interface)
with an ingress filter policy using this match criteria.
Note: Ingress ACL resources are shared with SAP ingress aggregate meter. See the
aggregate-meter
Parameters num-resources — Specifies the maximum amount of resources for use by this filter
Table 56
3HE 17358 AAAB TQZZA
command for more information.
match criteria.
If the user specifies max, the software allocates one chunk when the first SAP is
associated with an ingress filter policy using this match criteria. It continues to
allocate resources to SAPs associated with an ingress filter policy using this criteria,
as long as the total amount of resources allocated does not exceed the resources
allocated to ingress filter policies (configured with the config system resource-
profile ingress-internal-tcam acl-sap-ingress command) and chunks are
available for use.
Values Table 56
Number of Resources Available for MAC-Match-Enable
Platforms
7210 SAS-M (per node)
7210 SAS-T Access-Uplink mode (per node)
7210 SAS-T Network Mode (per node)
7210 SAS-R6 and 7210 SAS-R12 (per IMM)
7210 SAS-R6 and 7210 SAS-R12 IMM-c (per
IMM)
7210 SAS-Mxp (per node)
Use subject to Terms available at: www.nokia.com
lists the parameter values.
© 2021 Nokia.
System Management
Min value Max value
(per node) (per node)
0 5
0 2
0 2
0 10
0 9
0 10
sap-
Default
Values
max
max
max
max
max
max
545