Nokia 7210 Configuration Manual page 667

7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
For a virtual chassis (VC), this command displays information about the entire VC. Hardware
information can be displayed for individual CPMs, IMMs, power supplies, and fans.
Parameters environment — Displays chassis environmental status information.
power-supply — Displays only power-supply information.
Output The following outputs are examples of chassis information, and
fields.
Sample Output for 7210 SAS-M
A:7210-SAS-M# show chassis power-supply
===============================================================================
Chassis Information
===============================================================================
Power Supply Information
===============================================================================
A:7210-SAS-M#
A:7210-SAS-M# show chassis power-supply
===============================================================================
Chassis Information
===============================================================================
Power Supply Information
3HE 17358 AAAB TQZZA
Default all chassis information
• Sample Output for 7210 SAS-M
• Sample Output for 7210 SAS-T
• Sample Output for 7210 SAS-Sx/S 1/10GE
• Sample Output for 7210 SAS-Sx 10/100GE
• Sample Output for 7210 SAS-Sx 1/10GE with RPS
• Sample Output for a 7210 SAS Virtual Chassis
• Sample Output for 7210 SAS-Sx/S 1/10GE in Standalone VC Mode
Number of power supplies
Power supply number
Configured power supply type
Status
AC power
Power supply number
Configured power supply type
Status
Number of power supplies
Power supply number
Configured power supply type
Status
DC power
Input power
Output power
Use subject to Terms available at: www.nokia.com
: 2
: 1
: ac single
: up
: within range
: 2
: dc (+24V)
: not equipped
: 2
: 1
: dc (+24V)
: up
: within range
: within range
: within range
© 2021 Nokia.
System Management
Table 93 describes the output
667