Table of Contents
Advertisement
Control Block
9
8
!¢
!™
!£
!∞
3-26
EXT. CONT
REMOTE
AUX-2 (IRIG-B)
IN
OUT
16
15
14
13
8 EXT.CONT connector
Used to control the recorder by means of external make contacts.
9 COM connector
Used to control the recorder from a host computer via the RS-232C interface.
0 SYNC connector
Used when operating multiple recorders synchronously.
!¡ TRIG/REC IN connector
Used to input the trigger for trigger recording.
!™ REMOTE connector
Used to connect a remote control unit (sold separately).
!£ AUX-1 (DIGITAL) IN/OUT
Used to input and output AUX digital channel data. Connect BNC cables (sold
separately) to the corresponding connectors.
!¢ AUX-2 (IRIG-B) IN/OUT
Used to input and output AUX analog channel data. Connect BNC cables (sold
separately) to the corresponding connectors.
!∞ GROUND terminal
This terminal has the same electric potential as the signal line on the ground side and
the frame.
COM
SYNC
AUX-1 (DIGITAL)
TRIG/REC
IN
OUT
IN
OPTION SLOT 2
12
11
10
9
0
AC BREAK
8 7 6 5 4 3 2 1
% / dB
RAL / HLD
MST / SLV
9.6 / 19.2
IRIG ON / OFF
TRG S/M
APD OFF / ON
PTRG OFF/ON
(UP / DOWN)
DC IN
XLR 32F
DC BREAK
CANNON
!¡
O
8
7
6
5
Advertisement
Chapters
Table of Contents
