Sony SIR-1000W Instruction Manual page 109

Command
TOC?
Command format
Returned format
TRG?
Command format
Returned format
TOC data read
TOC? <1><2><3>/[ ]
<1><2><3>: ID number
TOC:<1><2>...<25>
<1>: Start ID
0 = Not start ID, 1 = Start ID
<2>: REC mode
0 = 16 ch analog mode (standard)
1 = Full analog mode
2 = Full digital mode (when SBS-10A/S is used)
3 = Analog + digital mode
<3>: CH code
When <2> is 0, 1, or 3, which means analog CH mode.
1 = 2 ch, 2 = 4 ch, 3 = 8 ch, 4 = 16 ch, 5 = 32 ch, 6 = 64 ch, 7 = 128 ch
When <2> is 2, which means digital CH mode.
1 = 1 ch, 2 = 2 ch, 3 = 4 ch, 4 = 8 ch
<4>: Recording speed
0 = 1 × (normal speed), 1 = 1/2 ×, 2 = 1/4 ×, 3 = 1/8 ×, 4 = 1/16 ×,
A = 2 ×, B = 4 ×, C = 8 ×, F = EXT
<5>: Reservation
Always 0
<6>-<17> Recording start time
<6><7>: Year (last 2 digits)
<8><9><10><11>: Month and date
<12><13><14><15><16><17>: Hours, minutes and seconds
<18> : Existence of pre-trigger recording
0 = No pre-trigger recording
1 = Pre-trigger recording
<19> : Existence of recording error
0 = No write error
1 = Write error
<20><21><22><23><24><25>: Actual recording length
hhmmss
Related command: VOL?
Trigger mode setting status
TRG? /[ ]
TRG:<1>
<1>: 0 = Trigger invalid
1 = Pre-trigger single mode (low: start)
3 = Normal single mode (low: start)
Related command: TRG
Contents
2 = Pre-trigger multi mode (low: start, high: stop)
4 = Normal multi mode (low: start, high: stop)
12-19