Sony SIR-1000W Instruction Manual page 114

Charging the Battery Pack on the Recorder
14-2
1
Mount the BP-L60/L60A or BP-L90/L90A battery pack (both sold separately) on the
battery pack mount on the left side of the recorder.
2
Supply the specified AC power source to the recorder. Charging can be used regardless
of the STAND BY switch position.
Note
• When the battery pack is mounted on the recorder, charging begins, the BATT LED
blinks and the ventilation fans rotate. Once charging is completed, the BATT LED
turns off.
It takes approximately 8 hours for BP-L60/L60A or 12 hours for BP-L90/L90A to
charge at 25°C (environmental temperature).
• When other functions of the recorder are not being used, set the STAND BY switch
to OFF. When charging is completed, the power to the recorder is turned off
automatically.
• When one or more channel expansion units are connected, it takes approximately ten
times to charge the battery.
3
When charging is completed, the BATT LED turns off.
4
Remove the battery pack from the recorder.