Operation System - Sony SIR-1000W Instruction Manual

18-8 Operation System

Front Panel
Rear Panel
Tape operation keys
REC
STOP
FWD
FF
REW
PAUSE
Cartridge ejection button
EJECT
Mode setting keys
SHIFT
SPD/BCM
RANGE
OFFSET
OUT/TSG
MRK/SLF
SEARCH
ID/UTL
;
:
8
9
Display setting keys
PK-CLR
ALL CH
SELECT
LOAD
CLOCK
Other setting keys
DATA-ANN/P-SAVE : For setting the speaker source, power-save mode, or fan control mode
VOL
STAND BY switch
VOLTAGE SELECTOR switch
Digital switches
RAL/HLD
9.6/19.2
TRG S/M
PTRG OFF/ON
APD OFF/ON
IRIG ON/OFF
MST/SLV
%/dB
Output level adjustment potentiometers
: E-E and recording mode
: Stop mode
: Playback mode
: Fast-forward mode
: Rewind mode
: Pause mode
: For ejecting the cartridge
: For shifting keys and locking the panel
: For selecting the tape speed and channel mode
: For setting the input range
: For setting the input DC offset
: For setting the output level and test signal
: For selecting the mark and self-check mode
: For selecting the search mode
: For setting the ID number and increment/Utility mode
: For moving between digits (to the left)
: For moving between digits (to the right)
: For increasing the set value
: For decreasing the set value
: For clearing the peak indicator
: For setting all channels at once
: For selecting the tape position information
: For setting the tape setting conditions
: For setting the internal clock.
: For setting the playback sound level
: For turning on and off the main power
: For switching the AC voltage (100 to 120 V and 220 to 240 V)
: For switching the bar meter peak indication
: For switching the RS-232C transfer rate
: For switching the trigger modes single and multiple
: For switching the pre-trigger recording modes off and on
: For switching the auto power-down modes off and on
: For switching IRIG time code input and output on and off
: For setting the recorder to master or slave during synchronous operation
: For switching the bar meter display scale
: For adjusting the volume
18-5