Sony SIR-1000W Instruction Manual page 31

#• ID display area
This area displays the ID number (source data/tape data).
Correspondence between the transport mode and the source data/tape data is shown in
the table below:
Transport Mode
E-E, REC-PAUSE, REC,
and succeeding STOP
FWD and succeeding STOP
#ª CAUTION display area
This area displays warnings concerning low DC voltage and recording and playback
errors.
$º MONI display area
This area displays the channel number of the monitored channel.
$¡ RANGE display area
• This area displays the input range value (source data or tape data) for the monitored
channel.
Correspondence between the transport mode and the source data (value set in
recorder) or tape data (value recorded on tape) is shown in the table below:
Transport Mode
E-E, REC-PAUSE, REC,
and succeeding STOP
FWD and
succeeding STOP
• In the OUT mode, this area displays the output level value for the channel to be set.
At this time the text "RANGE" is not displayed.
$™ SPEED display area
This area displays the tape speed at the tape was recorded in the FWD mode.
Display
Source data
(value set in recorder)
Tape data
(value recorded on tape)
Display
Source data
Tape data
3-17