Table of Contents
Advertisement
RELAY REQUEST
3-16
How to Use the Relay Request Function
You can use the relay request function to send a relay request to the designated
relay group. You cannot use the relay request function with more than one relay
group at the same time.
1
In fax mode, press the SENDING OPTIONS key.
Press the "3" key.
2
Instead of pressing the "3" key you can also press the left arrow key
(
) or right arrow key ( ) until this message appears and press the
ENTER key.
RELAY TX MODE
ENTER GROUP #
After three seconds the following message is displayed.
ENTER GROUP #
GROUP #(01-10)
3
Enter the relay group number using the numeric keys.
Example
PRESS START KEY
GROUP #(01-10)
Press the START key.
4
5
Set the original, select the appropriate original size,
resolution, and exposure, then perform the sending
operation. (See page 2-1)
You can use either direct or memory sending.
=
=01
Advertisement
Table of Contents
