Table of Contents
Advertisement
RELAY REQUEST
Entering Relay Groups
Before making a relay request, you must enter the relay group information (relay station, recipient). (The maximum number
of recipients depends on the relay station's restrictions on rapid dial, speed dial, group dial, and fax numbers.) You can enter a
up to 10 relay groups.
Information You Must Enter for Relay Requests (Preparation)
Enter the relay station fax number.
Enter the recipient's fax number (can be stored in
automatic dialling of relay station).
Enter the relay passcode with a user program. (See page Appendix-17)
The relay station can use automatic dialling to broadcast to other fax machines. This is convenient if
the relay station already has the recipient's fax numbers entered for automatic dialling.
Note
You can confirm the entered relay group information by printing the Relay Group List. (See page 5-6)
3-12
Sender
When Entering Relay Group Information
1
In fax mode, press the ENTRY key.
2
Press the "5" key.
Instead of pressing the "5" key you can also press the left arrow key
(
ENTER key.
3
Press the "1" key.
Relay Station
Enter the sender's fax number in the Relay Passcode
(maximum of 10).
ENTRY MODE
PRESS (1-5)
RELAY GROUP
1=SET, 2=CLEAR
) or right arrow key ( ) until this message appears and press the
RELAY GROUP
GROUP #(01-10)
=
Advertisement
Table of Contents
