Appendix; User Program List - Sharp AR-FX2 Operation Manual

USER PROGRAM LIST

The user programs for the fax function are listed below. You can use these programs only after entering the user program
number.
Number Program Name
P101 DEPARTMENT CODE SETTING
P103 PAUSE TIME SETTING
P104 SPEAKER VOLUME SETTING
P106 EXTENSION TEL. SETTING
P108 REMOTE RECEPTION # SETTING
P109 FW. RX DATA SETTING
FOR FAX DATA TRANSFER
P111 RECALL INTERVAL (BUSY) SETING
P112 RECALL TIMES (BUSY) SETTING
P113 RECALL INTERVAL (LINE ERROR) Set to change the time interval for dial retries when
SETTING
P114 RECALL TIMES (LINE ERROR)
SETTING
P115 INTERRUPT TX AT RECALL
MODE SETTING
P116 # OF RINGS AUTO TX SETTING
P117 # OF RINGS AUTO RX SETTING
P118 POLLING SECURITY SETTING
P119 PASSCODE # SETTING
P120 ID # SETTING
P121 SYSTEM NO. SETTING
P122 CONF. BOX # SETTING
P123 RELAY PASSCODE SETTING
Function
Set to restrict the use of the fax function to certain
departments.
Use to change the duration of pauses inserted in a
recipient's fax number.
Set to increase or decrease the speaker volume.
Set to connect an extension telephone.
Set to enter the 1-digit number for the remote reception
of faxes on an extension telephone.
Set to enter a phone number for the transferring of
faxes that the fax machine cannot output.
Set to change the time interval for dial retries when
the recipient's line is busy.
Set to change the number of retries when the recipient's
line is busy.
there is a transmission error.
Set to change the number of retries when there is a
transmission error.
Set to control whether faxes waiting in memory will
be sent when the current job cannot be sent (for
example, because of a busy signal).
Set to change the time that elapses before an automatic
transmission stops when there is no answer from the
recipient's fax.
Set to change the number of rings for automatic
reception.
Sets polling security so that only designated people
can poll your fax machine.
Use to create passcodes that contain the numbers of
the fax machines you want to allow to poll your fax
machine.
Use to enter the ID number of fax machines you want
to allow to poll your fax machine.
Use to enter the system number of your fax machine.
Use to enter the mailbox number and passcode for
confidential fax reception.
Use to create relay passcodes of fax machines that you
want to allow to make relay requests to your fax
machine.
Page

Appendix-5

Appendix-6
Appendix-7
Appendix-8
Appendix-8
Appendix-9
Appendix-10
Appendix-10
Appendix-10
Appendix-11
Appendix-11
Appendix-11
Appendix-12
Appendix-12
Appendix-13
Appendix-14
Appendix-15
Appendix-15
Appendix-17
Appendix-1