Table of Contents
Advertisement
PROGRAMS
3-38
When Erasing Programs
Before erasing a program, print out the Program List and confirm the entered
information. (See page 5-4)
You cannot modify a program once you have entered it. You must erase the program
completely, then enter the program again making the desired changes.
Follow steps 1 and 2 in the "When Entering Programs"
1
section. (See page 3-26)
2
Press the "2" key.
PROGRAM CLEAR
PRESS PROGRAM KEY
3
Open the second rapid key overlay.
Press the program key (P1 to P5) that you want to erase.
4
Example
PROGRAM #=03
PRESS START TO CLEAR
Cancelling
When cancelling the erasing of a program...
Before pressing the START key in step 5, press the CLEAR ALL key.
If you enter a program number that has not yet been
set, the NO # STORED message appears on the
Note
display and you return to step 2.
5
Press the START key.
The program is erased and you return to step 2.
You can erase other programs.
6
When you are finished erasing programs, press the
CLEAR ALL key.
Advertisement
Table of Contents
