Table of Contents
Advertisement
ENTERING AUTO DIALLING INFORMATION
2-26
Enter the recipient's fax number using the numeric
6
keys.
You can enter a maximum of 40 digits. If you need to enter a pause
between any digits of the number, press the REDIAL/PAUSE key. A
pause that you enter is displayed as a hyphen (-) character.
The pause time is set with a user program. (See page Appendix-6)
If you make a mistake entering the number, pressing the CLEAR key
repeatedly erases characters one at a time, and you can re-enter the
characters.
7
Press the START key.
The entered number is now set, proceed with entering the name.
ENTER NAME
8
Use the alphabetic entry keys to enter the name, and
press the ENTER key.
You can enter a maximum of 20 characters.
For information about entering alphabetic characters, refer to the
section "HOW TO ENTER CHARACTERS". (See page 2-37)
CHAIN DIAL
1=SET, 2=CANCEL
You can choose not to enter a name by simply pressing
the ENTER key without entering any characters.
Note
9
Press the number "1" or "2" key to set chain dialling.
If you press the "1" key and select "1= SET" chain dial entry begins,
and you return to step 3. For more information about chain dialling,
see page 3-42.
DEFALT TX SPEED
1:33600bps
For normal name entry, select "2 = CANCEL".
Note
10
Select the default transmission speed using keys 1
through 4.
1: 33600bps
2: 14400bps
3: 9600bps
4: 4800bps
Instead of choosing a number, you can use the left arrow key (
right arrow key (
transmission speed.
[About the transmission speed]
This procedure is the same as the one described in the "How to Enter
Rapid Dialling Information" section. Please refer to page 2-21.
After selecting the speed, the following message is displayed.
INT.NATIO.TX
1:NO
) and press the ENTER key to select the
) or
Advertisement
Table of Contents
