Sharp AR-FX2 Operation Manual page 158

ENTERING INFORMATION AND SETTING PROGRAMS (P101-P161)
Press one of the following keys.
3
Select the printing condition for broadcast operations.
"1" key: ALWAYS PRINT
"2" key: ERROR ONLY
"3" key: NEVER PRINT
Press the left or right arrow keys (
BROADCAST
1=ALWAYS PRINTS
BROADCAST
2=ERROR ONLY
BROADCAST
3=NEVER PRINTS
4 Press one of the following keys.
Select the printing condition for fax reception operations.
"1" key: ALWAYS PRINT
"2" key: ERROR ONLY
"3" key: NEVER PRINT
Press the left or right arrow keys (
RECEPTION
1=ALWAYS PRINTS
RECEPTION
2=ERROR ONLY
RECEPTION
3=NEVER PRINTS
5 Press one of the following keys.
Select the printing condition for confidential fax operations.
"1" key: ALWAYS PRINT
"2" key: NEVER PRINT
Press the left or right arrow keys (
CONF. RECEPTION
1=ALWAYS PRINTS
CONF. RECEPTION
2=NEVER PRINTS
P138 IMAGE MEM. PRINT (LINE ERROR) SETTING
Use program P138 to control whether to print the first part of the original on the transaction report when there is an error.
Initially, this program is set to "ON".
When you enter P138, the following message is displayed.
P138:IMAGE MEM.PRINT
(LINE ERROR)
1 Press the START key.
IMAGE MEM.PRINT
1=ON, 2=OFF
2 Press one of the following keys.
"1" key: ON
"2" key: OFF
Appendix-22
) to change between screens.
) to change between screens.
) to change between screens.