Terms - Mitsubishi Electric MELSEC iQ-R Series User Manual

TERMS

Unless otherwise specified, this manual uses the following terms.
Term
2-axis module
4-axis module
8-axis module
16-axis module
32-axis module
Axis
Buffer memory
CC-Link IE Field Network
CPU module
Device
Engineering tool
Global label
GX Works3
Intelligent function module
Label
Link device
Link scan (link scan time)
Module label
MR Configurator2
MR-J3(W)-B
MR-J4(W)-B
MR-J4W2-B
MR-J4-B-RJ
MR-J4-GF
MR-J4-GF-RJ
MR-J5(W)-B
MR-J5W2-B
MR-J5-B-RJ
MR-JE-B(F)
RD77GF
RD77MS
Remote input (RX)
Remote output (RY)
Remote register (RWr)
Remote register (RWw)
Servo amplifier
Simple Motion module
*1
SSCNET
*1
SSCNET/H
*1 SSCNET: Servo System Controller NETwork
14
Description
A generic term for RD77MS2
A generic term for RD77MS4
A generic term for RD77MS8
A generic term for RD77MS16
A generic term for RD77GF32
Another term for a servo amplifier
A memory in an intelligent function module, where data (such as setting values and monitoring values) are
stored. When using the CPU module, the memory is indicated for storing data (such as setting values and
monitored values) of the Ethernet function and data used for data communication of the multiple CPU function.
A high-speed and large-capacity open field network that is based on Ethernet (1000BASE-T)
The abbreviation for the MELSEC iQ-R series CPU module
A device (X, Y, M, D, or others) in a CPU module
A generic term for GX Works3 and MR Configurator2
A label that is enabled for all program data when creating multiple program data in the project. There are two
types of global labels: module label that is automatically generated by GX Works3 and label that can be created
for the any of the specified devices.
The product name of the software package for the MELSEC programmable controllers
A MELSEC iQ-R series module that has functions other than input and output, such as an A/D converter module
and D/A converter module
A label that represents a device in a given character string
A device (RX, RY, RWr, or RWw) in a module on CC-Link IE Field Network
Time required for all the stations on the network to transmit data.The link scan time depends on data volume and
the number of transient transmission requests.
A label that represents one of memory areas (I/O signals and buffer memory areas) specific to each module in a
given character string. GX Works3 automatically generates this label, which can be used as a global label.
The product name of the setup software for the servo amplifier
MR-J3-_B_(-RJ)/MR-J3W-_B Servo amplifier series
MR-J4-_B_(-RJ)/MR-J4W_-_B Servo amplifier series
MR-J4W2-_B Servo amplifier series
MR-J4-_B_-RJ Servo amplifier series
MR-J4-_GF_(-RJ) Servo amplifier series
MR-J4-_GF_-RJ Servo amplifier series
MR-J5-_B_(-RJ)/MR-J5W_-_B Servo amplifier series
MR-J5W2-_B Servo amplifier series
MR-J5-_B_-RJ Servo amplifier series
MR-JE-_B/MR-JE-_BF Servo amplifier series
Another term for the MELSEC iQ-R series Simple Motion module (compatible with CC-Link IE Field Network)
Another term for the MELSEC iQ-R series Simple Motion module (compatible with SSCNET/H)
Bit data input from a slave station to the master station (For some areas in a local station, data are input in the
opposite direction.)
Bit data output from the master station to a slave station (For some areas in a local station, data are output in the
opposite direction.)
Word data input from a slave station to the master station (For some areas in a local station, data are input in the
opposite direction.)
Word data output from the master station to a slave station (For some areas in a local station, data are output in
the opposite direction.)
A generic term for a drive unit. Unless specified in particular, indicates the motor driver unit of the sequential
command method which is controlled by the Simple Motion module (belonging to own station).
The abbreviation for the MELSEC iQ-R series Simple Motion module
High speed synchronous communication network between RD77MS and servo amplifier