FusionModule2000 Smart Modular Data Center
Maintenance Guide
Step 4 Remove the SIM card and micro SD card from the card slot.
Figure 5-9 Removing a SIM card and a micro SD card
Step 5 Install the spare SIM card and micro SD card into the card slot.
Figure 5-10 Installing a SIM card and a micro SD card
Step 6 Install the ECC800-Pro main control module in the card slot.
Step 7 Tighten the screws on both sides of the ECC800-Pro main control module.
Step 8 Reconnect signal cables to the ECC800-Pro main control module panel based on
the recorded information.
----End
5.4.2 Replacing the Management System
5.4.2.1 Replacing an IVS1800
Prerequisites
●
●
●
Issue 02 (2022-07-30)
Recommended tool: Phillips screwdriver
An IVS1800 needs to be replaced.
A spare IVS1800 of the same model is available and functional.
Copyright © Huawei Digital Power Technologies Co., Ltd.
5 Parts Replacement
71