FusionModule2000 Smart Modular Data Center
Maintenance Guide
Figure 5-35 Electronic lock
Step 3 Install a new electronic lock and connect the monitoring cable to the new lock.
Step 4 Log in to the ECC800-Pro WebUI, choose System Settings > Access Management,
set the access permissions for the new electronic lock according to those of the
damaged electronic lock. Then click Synchronize to Device to synchronize the
permissions.
Step 5 On the ECC800-Pro WebUI, choose System Settings > Device Management >
Device Deletion and select a device type from the Select a device type drop-
down list. Select a desired device in the Devices list, click Delete, and add the new
device to the smart module view.
Step 6 Check that the electronic lock functions properly.
----End
5.4.3.8 Replacing a Cabinet Fingerprint and Card Lock
Impact on the System
The fingerprint and card reader lock of the cabinet cannot be used.
Preparations
●
Procedure
Step 1 Open the cabinet door and disconnect the monitoring cable connected to the
fingerprint and card lock.
Step 2 Remove the fingerprint and card lock.
Issue 02 (2022-07-30)
Material: fingerprint and card lock
Copyright © Huawei Digital Power Technologies Co., Ltd.
5 Parts Replacement
88