Replacing A Camera - Huawei FusionModule2000 Maintenance Manual

FusionModule2000 Smart Modular Data Center
Maintenance Guide
4.
Step 4 Observe the hard disk indicator to check whether the hard disk works properly.
----End
Follow-up Procedure
If the new hard disk is not running properly, contact technical support.

5.4.2.3 Replacing a Camera

Impact on the System
The operation of the video surveillance system will be interrupted.
Preparations
●
●
Procedure
Step 1 Remove the transparent cover using a Phillips screwdriver.
Figure 5-18 Removing the transparent cover
Step 2 Remove the SD card.
Issue 02 (2022-07-30)
Close the chassis cover, and use a PH2 screwdriver to fasten the rear screws.
Figure 5-17 Closing the chassis cover
Tools: ESD wrist strap, ESD gloves, step ladder, label, marker, Phillips
screwdriver
Material: camera
Copyright © Huawei Digital Power Technologies Co., Ltd.
5 Parts Replacement
75