Huawei FusionModule2000 Maintenance Manual page 21

FusionModule2000 Smart Modular Data Center
Maintenance Guide
To avoid leakage, overheating, fire, or explosions, do not disassemble, alter, or
damage batteries, for example, insert sundries into batteries, squeeze batteries, or
immerse batteries in water or other liquids.
Do not burn batteries. Otherwise, the batteries may catch fire or explode.
There is a risk of explosion if the model of the replaced battery is incorrect. The
battery should be replaced with a battery of the model recommended by the
manufacturer.
Before installing and commissioning batteries, prepare fire extinguishing facilities,
such as fire fighting sands and carbon dioxide fire extinguishers, according to
construction standards and regulations. Before putting the battery room into
operation, ensure that it is equipped with a fire extinguishing system that
complies with local laws and regulations, has been constructed and commissioned,
and can work in automatic and manual control modes.
Before unpacking batteries, ensure that the packing cases are intact and correctly
placed according to the labels on the packing cases during their storage and
transportation. Do not place a battery upside down, lay it on one side, or tilt it.
Stack the batteries according to the stacking requirements on the packing cases.
Any bumping or falling may damage the batteries.
After unpacking batteries, place them in the required direction. Do not place a
battery upside down or vertically, lay it on one side, tilt it, or stack it with others.
Any bumping or falling may damage the batteries.
Issue 02 (2022-07-30)
D ANGER
D ANGER
D ANGER
WARNING
WARNING
WARNING
Copyright © Huawei Digital Power Technologies Co., Ltd.
1 Safety Information
14