Replacing An Aisle Led Light - Huawei FusionModule2000 Maintenance Manual

FusionModule2000 Smart Modular Data Center
Maintenance Guide
Figure 5-64 Securing the PAD power connector holder
Step 10 Reinstall the charging cable for the power connector.
Step 11 Reinstall the baffle plate under the power connector.
----End

5.4.20 Replacing an Aisle LED Light

Impact on the System
The aisle lighting will be affected.
Preparations
●
●
Context
● Power to the aisle LED light has been disconnected.
● During replacement, do not touch any end of the light with bare hands. You
Aisle LED lights should be laid out in parallel. The first and the last LED lights on
aisle sides should be connected in series. The LED lights should be installed on the
skylight connective plates. The light at either end can connect to a power cable to
obtain power.
An LED light has male and female connectors at both ends for interconnection.
Issue 02 (2022-07-30)
Tool: ESD gloves
Materials: lights
CA UTION
will get an electric shock if you touch bare electrodes.
Copyright © Huawei Digital Power Technologies Co., Ltd.
5 Parts Replacement
114