Mechanical Safety - Huawei FusionModule2000 Maintenance Manual

FusionModule2000 Smart Modular Data Center
Maintenance Guide
●
●
●
●
●
●
●
●
●
●
●

1.4 Mechanical Safety

When pulling equipment out of a cabinet, be aware of unstable or heavy objects
in the cabinet to prevent injury.
General Requirements
●
●
Hoisting
●
Issue 02 (2022-07-30)
When working at heights, comply with local relevant laws and regulations.
Only trained and qualified personnel are allowed to work at heights.
Before working at heights, check the climbing tools and safety gears such as
safety helmets, safety belts, ladders, springboards, scaffolding, and lifting
equipment. If they do not meet the requirements, take corrective measures or
disallow working at heights.
Wear personal protective equipment such as the safety helmet and safety belt
or waist rope and fasten it to a solid structure. Do not mount it on an
insecure moveable object or metal object with sharp edges. Make sure that
the hooks will not slide off.
Set a restricted area and prominent signs for working at heights to warn away
irrelevant personnel.
Carry the operation machinery and tools properly to prevent them from
falling off and causing injuries.
Personnel involving working at heights are not allowed to throw objects from
the height to the ground, or vice versa. Objects should be transported by
tough slings, hanging baskets, highline trolleys, or cranes.
Ensure that guard rails and warning signs are set at the edges and openings
of the area involving working at heights to prevent falls.
Do not pile up scaffolding, springboards, or other sundries on the ground
under the area involving working at heights. Do not allow people to stay or
pass under the area involving working at heights.
Inspect the scaffolding, springboards, and workbenches used for working at
heights in advance to ensure that their structures are solid and not
overloaded.
Any violations must be promptly pointed out by the site manager or safety
supervisor and the involved personnel must correct their operations. Personnel
who fail to comply with the requirements must stop the operations.
WARNING
Repaint any paint scratches caused during equipment transportation or
installation in a timely manner. Equipment with scratches cannot be exposed
to an outdoor environment for an extended period of time.
Before installation, ensure that the equipment is firmly anchored to the floor
or other solid objects, such as a wall or an installation rack.
Do not walk under hoisted objects.
Copyright © Huawei Digital Power Technologies Co., Ltd.
1 Safety Information
7