Replacing The Wifi Module; Replacing A Multi-Functional Sensor - Huawei FusionModule2000 Maintenance Manual

FusionModule2000 Smart Modular Data Center
Maintenance Guide
Step 5 On the ECC800-Pro WebUI, choose System Settings > Device Management >
Device Deletion and select a device type from the Select a device type drop-
down list. Select a desired device in the Devices list, click Delete, and add the new
device to the smart module view.
Step 6 Log in to the ECC800-Pro WebUI, and edit the plan view by adding the new device.
Step 7 Check the parameters and communication status of the smart ETH gateway to
ensure normal communication.
----End

5.4.5 Replacing the WiFi Module

Impact on the System
The app cannot be connected to the ECC800-Pro, and the smart module
information cannot be properly displayed.
Preparations
Material: WiFi module
Procedure
Step 1 Remove the old WiFi module from the USB port on the ECC800-Pro.
Step 2 Install the spare WiFi module in the original position.
Step 3 Log in to the ECC800-Pro WebUI.
Figure 5-39 Position of the WiFi module
----End

5.4.6 Replacing a Multi-Functional Sensor

Impact on the System
The temperature, humidity, and smoke cannot be sensed.
Issue 02 (2022-07-30) Copyright © Huawei Digital Power Technologies Co., Ltd.
5 Parts Replacement
91