Optional) Installing A Lan Switch - Huawei FusionModule500 Smart User Manual

FusionModule500 Smart Mini Data Center
User Manual (Philippines, FusionModule500-
SU61A12S)
Figure 4-33 Adjusting the camera
● By default, the camera is horizontally installed, and the surveillance video is
displayed horizontally. During the installation, adjust the surveillance angle to
avoid video image rotation after the installation.
● When adjusting the surveillance angle, pay attention to the position of the
illuminator to prevent the illuminator from being blocked.
Step 6 Align the transparent cover with the screw holes on the base, close the
transparent cover, and use a Phillips screwdriver to tighten the screws to 0.8 N·m.
Figure 4-34 Installing the transparent cover
----End

4.2.6.8 (Optional) Installing a LAN Switch

Procedure
Step 1 Locate the LAN switch installation position in the cabinet, and install guide rails
and floating nuts.
Step 2 Install the mounting ears delivered with the LAN switch and secure the LAN
switch to the rack rails at the front of the cabinet.
Issue 02 (2021-06-30)
NO TICE
NO TE
The camera features a three-axis design. The camera can be adjusted by –175° to +180°
horizontally, and the lens can rotate –175° to +180° and be adjusted by 0° to 65° vertically.
Copyright © Huawei Technologies Co., Ltd.
4 Installation Guide
82