Example: Adding A Smart Module - Huawei FusionModule500 Smart User Manual

FusionModule500 Smart Mini Data Center
User Manual (Philippines, FusionModule500-
SU61A12S)
Step 5 In the right side of the view area, set Management Info.
Step 6 Click
Step 7 Repeat steps
----End

5.3.11.1.8 Example: Adding a Smart Module

This section describes how to create a module in the root node, subnet, equipment
room, container, or site management domain.
Prerequisites
You have created management domains in Planning Configuration.
Procedure
Step 1 Log in to the NetEco client.
Step 2 On the main menu, choose Device Management > Configuration > Planning
Configuration.
Step 3 Choose the management domain where you want to add a smart module from
the navigation tree on the left.
Step 4 In the Domain area on the lower left of the page, select Modular from the drop-
down list box.
Step 5 Select the Modular to be added and drag the modular icon to the management
domain area.
Issue 02 (2021-06-30)
NO TE
You can adjust the shape of Room, Room–ShapeNode, Building–ShapeNode, Floor–
ShapeNode, Container–ShapeNode, and NetecoSite by:
1. Hold down Shift and click the frame to add a yellow dot.
2. Click and move the yellow dot to design an irregular polygon.
3. To delete a management domain, click the domain icon and select Delete under
NO TE
You can configure Management Info, Electricity Info, and Refrigeration Info for the
equipment room management domain.
on the toolbar to save the settings.
Step 3 to Step 6
Copyright © Huawei Technologies Co., Ltd.
until the configuration is complete.
5 Power-On Commissioning
.
144