Huawei FusionModule500 Smart User Manual page 135

FusionModule500 Smart Mini Data Center
User Manual (Philippines, FusionModule500-
SU61A12S)
Function
Open
cabinet
electroni
c clasp
locks in
batches
a: Cabinet electronic clasp lock 1 is used as an example.
Step 6 When closing the door, rotate the lock handle vertically downward. If the door
cannot be opened or closed properly, locate the fault.
1.
2.
3.
Issue 02 (2021-06-30)
Path
Choose Monitoring > Cabinet
and click the Controls tab.
Check whether there is friction between the lock tongue and the cabinet
electronic clasp lock. If so, adjust the installation position of the clasp lock.
Figure 5-8 Adjusting the position of a clasp lock
Check whether there is interference between the lock tongue and the cabinet
column. If so, adjust the installation position of the lock tongue.
Figure 5-9 Adjusting the position of a lock tongue
Check whether there is interference between the castors and the door sill at
the bottom of the cabinet. If so, remove the fasteners that secure the castors.
Copyright © Huawei Technologies Co., Ltd.
5 Power-On Commissioning
Operation
Select Open front door or Open
back door from the Open the
door drop-down list box, select
the setting, and click Submit.
The cabinet electronic clasp locks
unlock the doors in batches
based on the signal value.
126