Powering On A Server - Huawei FusionModule500 Smart User Manual

FusionModule500 Smart Mini Data Center
User Manual (Philippines, FusionModule500-
SU61A12S)
Step 3 Click Submit.
Step 4 Set NetEco communications parameters and authentication password on the
ECC800-Pro WebUI.
Table 5-19 NetEco parameters
Path
System
Settings >
NMS
Application
> NetEco >
Communicat
ion
Parameters
Table 5-20 Setting an authentication password
Path
System
Settings >
NMS
Application
> NetEco >
Set
Authenticati
on Password
Step 5 Click Submit.
----End

5.3.11.1.3 Powering On a Server

This topic describes how to power on a server.
Issue 02 (2021-06-30)
Parameter Default
Value
Server IP 192.168.8.
11
Port number 31220
Network port WAN_1
for link setup
Parameter Default
Value
Authenticatio Modifyme
n password _123
Confirm -
authenticatio
n password
Copyright © Huawei Technologies Co., Ltd.
5 Power-On Commissioning
Setting
IP address of the primary NetEco
server
NOTE
The NetEco IP address and the ECC800-
Pro IP address must be configured in
the same network to ensure normal
connection between the NetEco and
the ECC800-Pro.
31220
WAN_1
Setting
Set this parameter based on
customer requirements.
NOTE
Requirements for setting passwords:
'a~z','A~Z','0~9','~!@#^*_={}:,./?-`
$'(8-32 characters that include at least
three of the following types: lowercase
letters, uppercase letters, digits, and
special characters)
-
140