Events Defined By Default - Mitsubishi Electric MELSEC iQ-R Series User Manual

Events defined by default

The following table shows events that are predefined in the SECS/GEM communication software.
Event name
EQUIPMENT OFF-LINE
CONTROL STATE LOCAL
CONTROL STATE REMOTE
PROCESSING STARTED
PROCESSING COMPLETED
PROCESSING STOPPED
PROCESSING STATE SETUP
PROCESSING STATE READY
PROCESSING STATE EXECUTING
PROCESSING STATE IDLE
PROCESSING STATE PAUSE
ALARM DETECTED
ALARM CLEARED
EQUIPMENT CONSTANT CHANGE
LIMIT ZONE TRANSITION
PROCESS PROGRAM CHANGE
PROCESS PROGRAM SELECTED
MATERIAL RECEIVED
MATERIAL REMOVED
SPOOLING ACTIVATED
SPOOLING DEACTIVATED
SPOOL TRANSMIT FAILURE
MESSAGE RECOGNITION
8 GEM COMPLIANT FUNCTIONS
228
8.14 Event Setting
Trigger
Automatic (ON-LINE->OFF-LINE)
Automatic (OFF-LINE->ON-LINE, REMOTE-
>LOCAL)
Automatic (OFF-LINE->ON-LINE, LOCAL-
>REMOTE)
Automatic (->EXECUTING)
Automatic (COMPLETE)
Automatic (STOP)
Automatic (->SETUP)
Automatic (->READY)
Automatic (->EXECUTING)
Automatic (->IDLE)
Automatic (->PAUSE)
Automatic (ALARM n occurred)
Automatic (ALARM n cancelled)
Automatic (Equipment constant change)
Automatic (Transition within LIMIT area)
Automatic (Process Program change)
Automatic (Process Program selection)
Relay request
Relay request
Automatic (SPOOL INACTIVE->SPOOL ACTIVE)
Automatic (SPOOL ACTIVE->SPOOL INACTIVE)
Automatic (SPOOL transmission failure)
Relay request
Link report and remarks
Control state report
Control state report
Control state report
Process report
Process report (enabled only for transition based
on command)
Process report (enabled only for transition based
on command)
Processing state report
Processing state report
Processing state report
Processing state report
Processing state report
Alarm report (defined only for alarms required by
event)
Alarm report (defined only for alarms required by
event)
Equipment constant change report
Limit transition report (defined for each limit
variable)
Process program change report
Process program selection report
Time report
Time report
Spool start report
Spool stop report
Spool transmission failure report
Time report