Replace Device - Mitsubishi Electric MELSEC iQ-R Series User Manual

Replace device

Replace found devices.
The correspondence of device types that can be replaced is as follows.
Before replacement
B, M
X
Y
D, R, W, ZR
Precautions
Devices cannot be replaced while all devices in use are displayed.
Replace by device
Replace specified devices.
Operating procedure
1.
Select devices to be replaced in the Device List.
2.
Configure "Replace Device Top".
3.
Click the [Replace Select Device] or [Replace All Device] button.
Replacement by range
Group and replace consecutive devices.
Ex.
Replace (move) devices included in the range from D0 through D99 to D100 through D199.
Specifying a range and replacing can only be done when a range was specified and devices were found.
Operating procedure
1.
Select devices to be replaced in the Device List.
2.
Configure "Replace Device Top".
3.
Select the "Range Move" checkbox.
4.
Click the [Replace Select Device] or [Replace All Device] button.
Application of replacement results
Apply the results of device replacement to settings.
Operating procedure
1.
In the "Device Find/Replace" screen, click the [OK] button.
2.
In the confirmation screen, click [OK].
The replacement results are applied to the settings.
After replacement
B, M
B, M, X
B, M, Y
D, R, W, ZR
7 BASIC FUNCTIONS
153
7.16 Device Find/Replace
7