Mitsubishi Electric MELSEC iQ-R Series User Manual page 127

Spool message settings
Window
[Setting]  [Spool Setting]  [Spool Message] tab
Displayed items
Item
Message Selection
Item
Spooling setting list display
[Up] button
[Down] button
[Add] button
[Modify] button
[Delete] button
Precautions
The setting of the spool flag path is defined for content already configured. Accordingly, be aware that it is necessary to
configure the spool flag path setting again when the corresponding message was changed.
Description
Select the defined message name and Stream/Function number.
Select an item.
Use when a spool flag is included in the item of a message subject to spool.
In this way, the spool flag distinguishes between normal sending and spooling sending.
• Normal sending: conforms to item information
• Spooling sending: fixed to "1"
When the corresponding item is used as a spool flag, the defined item name is displayed for messages with the spool
flag selected, so click the [Search] button.
Confirm the message flag path, and then click and configure each button.
A list of defined spool messages is displayed.
If a message is selected, the message content and spool flag path are displayed.
Change the order of messages of "Spooling setting list display"
Configure new spool messages.
Change a spool flag of an already configured message.
Cancel messages subject to spooling.
7 BASIC FUNCTIONS
7.10 Spooling Function (non-GEM version)
7
125