Connected Device Configuration - Mitsubishi Electric MELSEC iQ-R Series User Manual

3.3

Connected Device Configuration

This section shows equipment that can be connected to the SECS/GEM communication software pre-installed model module.
SD memory card (need to purchase separately)
For SD memory cards that can be used with the MELSEC iQ-R series SECS/GEM communication software pre-installed
model module, refer to the following:
MELSEC iQ-R C Intelligent Function Module User's Manual (Startup)
CF card (sold separately)
For CF cards that can be used with the MELSEC-Q series SECS/GEM communication software pre-installed model module,
refer to the following:
MELSEC-Q C Controller Module User's Manual
C Controller Module User's Manual (Hardware Design, Function Explanation)
Precautions
Always install a memory card when using the SECS/GEM communication software.
Because the number of writes to a memory card is limited, determine the necessity of writing functions, such as link test logs
and programmable-controller detailed log collection, before using a card.
Before removing a memory card, make sure that there is no file access. If the card is removed during data writing, internal
files may become corrupted.
3 SYSTEM CONFIGURATION
24
3.3 Connected Device Configuration