Mitsubishi Electric MELSEC iQ-R Series User Manual page 165

Item
[Save] button
Log Types
Display the correspondence of the symbols displayed in log data and log types.
Symbol Description
O(Output) Log for which the SECS/GEM communication software changed
the relay status
I(Input) Log for which the programmable controller CPU changed the relay
status
S(Send) Message sending log
R(Receive) Message reception log
U(User) User Log
M(Management) Log to display the SECS status by the SECS/GEM communication
software
E(Error) Error Log
SECS Log
The following section shows the display of SUMMARY.
Item
S
F
Dev
No.
LEN
If an SECS log is selected in the Log list, the content of the SECS communication log appears in the Data View.
The following section explains the operations of the Log list.
■Summary display
Provides a summary view showing the data header in binary in the Data View.
Right-click  shortcut menu [Summary]
■Dump display
Dumps the SECS communication data content in the Data View.
Right-click  shortcut menu [Dump]
■Text display
Shows the SECS communication data content in the Data View in a tree structure.
Right-click  shortcut menu [Text]
Description
Save the log data currently displayed.
The following file formats can be selected.
• Binary log file (file extension: .log): The binary log data is saved as it is. Use the [Load] button on the
screen to view the log later.
• Text log file (file extension: .txt): The log data is configured as a list and saved as text data. The text
data can be opened and browsed with any text editor.
Description
Stream number
Function number
Device ID
Line number
Byte length
Log Types
Programmable controller log
Programmable controller log
SECS Log
SECS Log
User Log
SECS status message
Error Log
7 BASIC FUNCTIONS
7.17 Log Output
7
163