Project Archive File Get - Mitsubishi Electric MELSEC iQ-R Series User Manual

7.11

Project Archive File Get

Series
MELSEC-Q series
MELSEC iQ-R series
Acquire the user definition archive (USRSET.LZH or USRSET.ZIP
pre-installed model module and put it in the prescribed folder.
The user definition archive is obtained from the "Destination" set in the "Update Module" screen.
*1 The extension of a user definition archive file to be acquired differs depending on the software version.
Software version of setting
tool
1.30G or earlier
1.31H or later
For software versions supporting ZIP extension, refer to the following:
Page 299 Added and Changed Functions
In the case of a MELSEC iQ-R series SECS/GEM communication software pre-installed model module,
replace the term "C Controller" with "C intelligent function module."
Window
[Setting]  [Project Archive File Get]
Displayed items
Item
IP Address
User
Password
Operating procedure
1.
Specify the folder to store the user definition archive to be acquired in the "Browse Folder" screen.
2.
Configure the items of the "Project Archive File Get" screen.
3.
Click [Get].
4.
Click [OK].
7 BASIC FUNCTIONS
128
7.11 Project Archive File Get
SECS/GEM communication software
Non-GEM version


Extension of user definition archive file saved in module
LZH
LZH is acquired.
Description
Configure the IP address of the SECS/GEM communication software pre-installed model module.
Configure the username (login name) of the SECS/GEM communication software pre-installed model module.
Configure the password of the SECS/GEM communication software pre-installed model module.
GEM version


*1
) transferred to the SECS/GEM communication software
ZIP
Neither is acquired.
ZIP is acquired.
GEM advanced version


LZH and ZIP
LZH is acquired.
ZIP is acquired.