Changing The Ip Address From The Setting Tool - Mitsubishi Electric MELSEC iQ-R Series User Manual

Changing the IP address from the setting tool

Change the IP address of the SECS/GEM communication software pre-installed model module from the setting tool.
In the case of a MELSEC iQ-R series SECS/GEM communication software pre-installed model module,
replace the term "C Controller" with "C intelligent function module."
Window
[Function]  [IP Address Setting]
Operating procedure
1.
Select the Ethernet port to change the IP address.
For a MELSEC iQ-R series SECS/GEM communication software pre-installed model module, the unselected Ethernet port
operates with an IP address set by GX Works3.
For a MELSEC-Q series SECS/GEM communication software pre-installed model module, the unselected Ethernet port
operates with an IP address managed by the Setting/monitoring tools for the C Controller module.
2.
Set each item.
3.
Click the [Update] button.
4.
A screen appears. Enter the IP address, user, and password of the target SECS/GEM communication software pre-
installed model module.
5.
Click the [Update] button.
After transfer, the IP addresses is changed by resetting the SECS/GEM communication software pre-installed model module.
7 BASIC FUNCTIONS
135
7.13 IP Address Setting
7