Mitsubishi Electric MELSEC iQ-R Series User Manual page 132

Window
[Setting]  [Update Module] (When using a MELSEC iQ-R series SECS/GEM communication software pre-installed
model module)
[Setting]  [Update Module] (When using a MELSEC-Q series SECS/GEM communication software pre-installed model
module)
Displayed items
Item
C Intelligent Function Module
C Controller
SD Card
CF Card

Operation After Updating
Startup Action
Project Archive File Transfer
Applications Install
*1 Can be configured for only a GEM version and GEM advanced version.
*2 The extension of a user definition archive file differs depending on the software version.
For software versions supporting ZIP extension, refer to the following:
Page 299 Added and Changed Functions
7 BASIC FUNCTIONS
130
7.12 Updating SECS/GEM Communication Software Pre-installed Model Module
Description
Select this to transfer the setting file to the Standard ROM or memory card.
Select this to save the setting file directly to the memory card via a card reader.
IP Address Configure the IP address of the SECS/GEM communication software pre-installed model module.
User Configure the username (login name) of the SECS/GEM communication software pre-installed model
module.
Password Configure the password of the SECS/GEM communication software pre-installed model module.
Destination Select the transfer destination of the setting file.
Select an operation after updating.
For details, refer to the following:
Page 131 Operation After Updating
*1
Variable Setup Select whether to change to match the variable definition content the next time the SECS/GEM
communication software starts.
Configuration File Select the setting file to be referenced the next time the SECS/GEM communication software starts.
*1
Browse
Select this checkbox to archive and transfer the setting file information.
If the information is transferred, a user definition archive file (USRSET.LZH or USRSET.ZIP
in the transfer destination folder.
When a user definition archive file already exists in the transfer destination, the existing file is
overwritten by a new one.
Select this checkbox to transfer the application file of the SECS/GEM communication software from the
SECS/GEM communication software pre-installed model module.
*2
) is created